Tailpipes, Caps and Baffles

Active Exhaust Tailpipe Cap

MKCAM32AE

Tailpipe Cap for use with active exhaust to completely silence the system. Performance benefits of the premuffler remain.
FITS ACTIVE EXHAUST ONLY, see below for other applications.
Price: $45

[paypal_wp_button_manager id=663]

Internal Tailpipe Cap

MKC25I

Tailpipe cap slides into all 2.5″OD straight tailpipes such as those used on all GT3, S and R mufflers. Secures with set screw. A hole must be drilled into the existing tailpipe. Functions to eliminate drone or quiet the muffler when needed. Cap is hidden inside the pipe to retain the dual out look (pictured installed).

Price: $55

[paypal_wp_button_manager id=918]

Turn Down Tailpipe & Clamp

MKTDP250

Turn Down Pipe can be mounted on any of the 2.5″OD straight or curved tailpipes used on our mufflers. Diverts exhaust noise for race track restrictions or use in place of the existing tailpipe. Comes with clamp for easy installation.

Price: $150

[paypal_wp_button_manager id=926]

2″OD Tailpipes

MKTP200-8

2″OD x 8″ Long bolt-on Tailpipes replace the standard 2.5″OD tailpipes on all of our mufflers using the straight bolt-on tailpipes, such as S, R, and GT3. Comes in Brushed polish finish. Sold in sets of 2.

Price: $150

[paypal_wp_button_manager id=928]

Baffled Tailpipes, 2.5″ x 8″

MKTP250-8B

Need to calm the sound level a touch on your straight tailpipe muffler? These are replacement tailpipes with baffles welded in. They are the same tailpipes used on our ST (Street) series mufflers. Will fit all mufflers that use bolt-on pipes such as S, R, and GT3. Sold in sets of 2.

Price: $250

[paypal_wp_button_manager id=936]

Installed

Baffled Tailpipes, 3″ x 8″

MKTP300-8B

Big Dog Tailpipes with Baffles. These 3″OD tailpipes have baffles welded in to give the big look without the big sound increase and heightened opportunity for drone. Tailpipes replace the standard 2.5″ pipes on all bolt-on tailpipe mufflers such as S, R, and GT3. Sold in sets of 2.

Picture shows 3″ pipes installed on an MKM34 dual inlet GT3 muffler.

Price: $295

[paypal_wp_button_manager id=941]

Curved Tailpipe with OEM Tip

MKTPOE

Get M&K quality and performance with an OEM look. Clamp-On Tailpipe with OEM Tip replaces the standard polished tailpipes on our Single Out (MKM27) or Dual Out (MKM26) mufflers, both Early 911 and Impact Bumper 911. 2.5″OD. Comes in Black painted finish or Chrome tip with stainless tailpipe. Please specify Black or Chrome when ordering. Sold each.

PLEASE NOTE MUFFLER PART NUMBER FOR PROPER FITMENT (example: MKM27 or MKM27E)

Price: $150

[paypal_wp_button_manager id=1115]

OE Tailpipe for Single Inlet Single Outlet Muffler

MKM33OE

Get M&K quality and performance with an OEM look. We modify an OEM tailpipe and graft it onto the end of our MKM33 Single Inlet Single Outlet muffler. Comes in Black painted or Chrome finish on our standard stainless tailpipe. Please specify Black or Chrome when ordering. To be purchased in conjunction with our MKM33 muffler.

$150

[paypal_wp_button_manager id=1447]